This search combines search strings from the content search (i.e. "Full Text", "Author", "Title", "Abstract", or "Keywords") with "Article Type" and "Publication Date Range" using the AND operator.
Beilstein J. Nanotechnol. 2020, 11, 167–179, doi:10.3762/bjnano.11.14
Figure 1: SEM images of a) G1, b) G2, c) G3, d) HDPE/G1 nanocomposite with 5.52 vol %, e) HDPE/G2 nanocomposi...
Figure 2: XPS: a) survey and b) C 1s high-resolution spectra for G1, G2, and G3.
Figure 3: a) FTIR spectrum and b) XRD pattern of the GnPs, pure HDPE, and HDPE/13.94 vol % GnP nanocomposites....
Figure 4: Real part of AC electrical conductivity vs frequency for a) HDPE/G1, b) HDPE/G2, and c) HDPE/G3 nan...
Figure 5: The relative thermal conductivity values of HDPE-based nanocomposites with G1, G2, and G3 fillers (k...
Figure 6: Relative mechanical properties of the HDPE/GnP nanocomposites: a) Young’s moduli and b) tensile str...
Figure 7: TGA thermographs of the HDPE/GnP nanocomposites with a) G1, b) G2, and c) G3 filler. The insets sho...
Beilstein J. Nanotechnol. 2019, 10, 1443–1451, doi:10.3762/bjnano.10.142
Figure 1: Illustration of the experimental deposition chamber. Top view, without cover. The chamber is closed...
Figure 2: Chamber cover after deposition. The shape of the chamber is outlined by the PTFE paste used for sea...
Figure 3: Samples in chamber during deposition, immediately before being taken out of the chamber. The glass ...
Figure 4: GIXRD of as-deposited samples with indexed reflections attributed to cubic LiH. GIXRD was performed...
Figure 5: Possible mechanism of the surface reactions.
Figure 6: Derivative Auger spectra confirming the presence of Li2O on the surface, acquired at two different ...
Figure 7: XPS spectra before Ar sputtering of a) Li 1s region, b) C 1s and c) O 1s region.
Figure 8: In situ QCM results, showing approximately 18 sALD cycles. The maxima and minima correspond to the ...
Figure 9: SEM of the Si/Pt sample surface after deposition and exposure to atmosphere. The large crystal seen...
Figure 10: SEM of a Si sample cleaved after deposition. The film thickness was estimated to be roughly 45 nm.
Figure 11: Growth curve obtained from spectroscopic ellipsometry. The thickness is relative to the SEM cross-s...